Skip to main content

Configure Peer Discovery

This guide provides detailed steps to configure a nwaku node to discover and connect with peers in the Waku Network.

info

You can configure a nwaku node to use multiple peer discovery mechanisms simultaneously.

Configure static peers​

You can provide static peers to a nwaku node during startup using the staticnode configuration option. To connect to multiple peers on startup, repeat the staticnode option:

./build/wakunode2 \
  --staticnode=[PEER MULTIADDR 1] \
  --staticnode=[PEER MULTIADDR 2]

For example, consider a nwaku node that connects to two static peers on the same local host (IP: 0.0.0.0) using TCP ports 60002 and 60003:

./build/wakunode2 \
  --staticnode=/ip4/0.0.0.0/tcp/60002/p2p/16Uiu2HAkzjwwgEAXfeGNMKFPSpc6vGBRqCdTLG5q3Gmk2v4pQw7H \
  --staticnode=/ip4/0.0.0.0/tcp/60003/p2p/16Uiu2HAmFBA7LGtwY5WVVikdmXVo3cKLqkmvVtuDu63fe8safeQJ

Configure DNS discovery​

To enable DNS Discovery in a nwaku node, use the following configuration options:

  • dns-discovery: Enables DNS Discovery on the node (disabled by default).
  • dns-discovery-url: URL for DNS node list in the format enrtree://<key>@<fqdn> where <fqdn> is the fully qualified domain name and <key> is the base32 encoding of the compressed 32-byte public key that signed the list at that location.
  • dns-discovery-name-server (optional): DNS name server IPs to query. You can repeat this option to provide multiple DNS name servers.
./build/wakunode2 \
  --dns-discovery=true \
  --dns-discovery-url=enrtree://[PUBLIC KEY]@[DOMAIN NAME] \
  --dns-discovery-name-server=[DNS NAME SERVER IP]
info

If you omit the dns-discovery-name-server option, nwaku will attempt to use the CloudFlare servers 1.1.1.1 and 1.0.0.1.

For example, consider a nwaku node that enables DNS Discovery, connects to a DNS node list, and queries the IPs 8.8.8.8 and 8.8.4.4:

./build/wakunode2 \
  --dns-discovery=true \
  --dns-discovery-url=enrtree://ANEDLO25QVUGJOUTQFRYKWX6P4Z4GKVESBMHML7DZ6YK4LGS5FC5O@prod.wakuv2.nodes.status.im \
  --dns-discovery-name-server=8.8.8.8 \
  --dns-discovery-name-server=8.8.4.4

Configure Discv5​

To enable Discv5 in a nwaku node, use the following configuration options:

  • discv5-discovery: Enables Discv5 on the node (disabled by default).
  • discv5-bootstrap-node: ENR for Discv5 routing table bootstrap node. You can repeat this option to provide multiple bootstrap entries.
./build/wakunode2 \
  --discv5-discovery=true \
  --discv5-bootstrap-node=[DISCV5 ENR BOOTSTRAP ENTRY 1] \
  --discv5-bootstrap-node=[DISCV5 ENR BOOTSTRAP ENTRY 2]

For example, consider a nwaku node that enables Discv5 and bootstraps its routing table using a static ENR:

./build/wakunode2 \
  --discv5-discovery=true \
  --discv5-bootstrap-node=enr:-IO4QDxToTg86pPCK2KvMeVCXC2ADVZWrxXSvNZeaoa0JhShbM5qed69RQz1s1mWEEqJ3aoklo_7EU9iIBcPMVeKlCQBgmlkgnY0iXNlY3AyNTZrMaEDdBHK1Gx6y_zv5DVw5Qb3DtSOMmVHTZO1WSORrF2loL2DdWRwgiMohXdha3UyAw
info

When Discv5 is enabled and used with DNS Discovery, the nwaku node will attempt to bootstrap the Discv5 routing table by extracting ENRs from peers discovered through DNS.

Configure peer exchange​

To enable Peer Exchange in a nwaku node, use the following configuration options:

  • peer-exchange: Enables Peer Exchange on the node as a responder (disabled by default).
  • peer-exchange-node (optional): Multiaddr for bootstrap node with the peer exchange protocol enabled.
./build/wakunode2 \
  --peer-exchange=true \
  --peer-exchange-node=[PEER MULTIADDR WITH EXCHANGE ENABLED]

For example, consider two nwaku nodes configured as a server (peer exchange responder node) and client (node using peer exchange) on the same local host (IP: 0.0.0.0):

Server: Nwaku Node with Peer Exchange Enabled
./build/wakunode2 --peer-exchange=true
Client: Nwaku Node Bootstrapping with Peer Exchange
./build/wakunode2 \
  --tcp-port=30305 \
  --ports-shift=1 \
  --peer-exchange-node=/ip4/0.0.0.0/tcp/60000/p2p/16Uiu2HAmLCe6zVqCS6KMqqRbbhyoJjfYZGr1Q3thTSbyKzibQkFR
info

nwaku provides a relay-peer-exchange option via libp2p for peer exchange, allowing network growth through neighbouring nodes. However, this feature can compromise security and network robustness, so we recommend only using it in high-trust environments.